Mouse Polling Rate Test
Move your mouse in steady, fast circles inside the box for about three seconds. The readout shows how many position reports per second reach the browser.
Runs locally in your browser. No data leaves your device.
Move the mouse in steady circles
How to read the results
Each dot in the movement area is one position report from your mouse. The current reading averages the report interval over the last quarter second, ignoring pauses, so you can see the rate change as you move.
Getting an accurate reading
- Move in steady, fast circles. Slow or stop-start movement lowers the reading because the sensor has nothing new to report.
- Keep the browser in the foreground on mains power. Laptops on battery may throttle input handling.
- Run the test for at least three seconds so the average settles.
Common rates
- 125 Hz: office mice and many wireless mice in power-saving mode.
- 500 Hz: older gaming mice and some Bluetooth connections.
- 1000 Hz: the standard for gaming mice.
- 2000 to 8000 Hz: high-polling mice, usually with a dedicated receiver or wired.
Questions
What is mouse polling rate?
Polling rate is how many times per second the mouse reports its position to the computer. 125 Hz means a report every 8 ms, 1000 Hz every 1 ms, and 8000 Hz every 0.125 ms. Higher rates reduce input delay and make cursor motion smoother on high refresh rate monitors.
Why does the test show less than my mouse's rated Hz?
Small shortfalls are normal: the browser occasionally drops or merges reports while it is busy, so a 1000 Hz mouse often reads 900 to 1000 Hz. A large gap usually means the rate is set lower in the mouse software, the receiver is on a USB hub, or a power-saving mode is on.
Can a browser measure 8000 Hz?
Yes, in Chrome, Edge and Firefox. Browsers bundle fast reports into one event per frame, and the getCoalescedEvents() API returns every individual report, which this test counts. Without that API a browser can only see about one report per display frame.
Is 8000 Hz worth it over 1000 Hz?
The latency gain is under 1 ms, and it costs CPU time. It is most noticeable on 240 Hz and faster monitors, where cursor motion looks smoother. On a 60 Hz or 144 Hz display, 1000 Hz is plenty.
What does the stability number mean?
It shows how evenly spaced the reports are. 100% means every report arrived at exactly the same interval. Low stability with a wireless mouse often means radio interference or a receiver too far from the mouse.