Controller Drift Test
Connect a controller over USB or Bluetooth and press any button. Run the hands-off drift scan to measure how far the sticks sit from center at rest.
Runs locally in your browser. No data leaves your device.
Connect controller via USB or Bluetooth and press any button to wake browser input.
Normal ≤ 0.03, mild drift up to 0.08, clear drift above that.
Analog triggers
Press each trigger fully. A max below 95% means it cannot reach full travel.
Buttons
- A / Cross
- B / Circle
- X / Square
- Y / Triangle
- LB / L1
- RB / R1
- LT / L2
- RT / R2
- View / Share
- Menu / Options
- L3
- R3
- D-pad up
- D-pad down
- D-pad left
- D-pad right
- Home / PS
Waiting for a controller
How to read the results
Each stick reports two values from −1 to 1. At rest both should be very close to 0. The offset is the distance from center, so 0.050 means the stick reads 5% of full travel while nobody is touching it.
Drift thresholds
- 0.030 or less: normal sensor noise. Default game deadzones hide it.
- 0.031 to 0.080: mild drift. Causes slow camera creep in games with small deadzones.
- Above 0.080: clear hardware drift that tends to get worse.
Testing tips
- Before the scan, flick each stick to the edge and let it snap back, the way it would in a game.
- Run the scan twice. A single high reading can come from a stick not fully settling.
- The dashed orange ring on each stick shows the recommended deadzone once the scan finishes.
Questions
How do I test my controller for stick drift?
Connect the controller, press any button so the browser can see it, then run the hands-off drift scan with the controller lying flat. The scan records how far each stick sits from center for 8 seconds. Up to 0.03 is normal noise; above 0.08 is clear drift.
What deadzone should I use for stick drift?
Use the deadzone the scan recommends: the highest resting offset plus a small margin, rounded up to a whole percent. Set it in Steam Input or in the game's controller settings. Keep it as low as you can, because a large deadzone makes small aiming movements feel sluggish.
Why is my controller not detected?
Browsers hide controllers until they send input, to stop sites fingerprinting your devices. Press a face button after connecting. If it still does not appear, try a different USB cable (some are charge-only), re-pair over Bluetooth, and close Steam Big Picture or DS4Windows if they are taking exclusive control.
What is a good circularity error?
Most controllers measure between about 5% and 15%. The error is how far the outer edge of the stick's travel strays from a perfect circle. Square or octagonal gates read higher at the diagonals. A sudden jump on one side often means a worn or damaged gate.
Do Hall effect or TMR sticks really stop drift?
They remove the main cause. Standard sticks use potentiometers with a wiper rubbing a carbon track, which wears and causes drift. Hall effect and TMR sticks sense a magnet's position without contact, so that wear does not happen.
Does this work with PS5 DualSense, Xbox and Switch Pro controllers?
Yes, in Chrome and Edge over USB or Bluetooth, and in Firefox with most controllers. Labels follow the standard layout used by Xbox and PlayStation pads. Rumble works where the browser supports the Gamepad vibration API.