Mic Test
Start the mic to see a live level meter. Stay quiet for the 3-second noise scan, then talk normally to check for clipping, and record a short clip to hear yourself.
Runs locally in your browser. No data leaves your device.
Your browser will ask for microphone access. Audio is analysed in this tab and never uploaded.
Start the microphone, then scan the room
How to read the results
The level meter shows the average loudness (RMS) as a bar and the recent peak as a line. The noise scan averages three seconds of silence to find the noise floor, the sound your setup makes when nobody is talking.
Thresholds
- Noise floor below −50 dBFS: clean.
- −50 to −40 dBFS: noticeable hiss or room noise.
- Above −40 dBFS: excessive hum, static or noise.
- Peaks above −1 dBFS: clipping. Lower the gain.
Checking your whole call setup? Test your speakers with the headphone and speaker test and your camera with the webcam test.
Questions
How do I test my microphone online?
Press Start microphone and allow access. The meter and waveform move when the mic picks up sound. Stay quiet and run the 3-second room noise scan, then talk normally to check your level. You can also record up to 15 seconds and play it back. Everything stays in your browser.
What is a good noise floor for a microphone?
Below −60 dBFS is very quiet. −60 to −50 dBFS is fine for calls and streaming. −50 to −40 dBFS is noticeable hiss or room noise. Above −40 dBFS listeners will clearly hear hum, static or fan noise under your voice.
What does dBFS mean?
Decibels relative to full scale. 0 dBFS is the loudest value digital audio can hold, so every level is a negative number. Speech should peak around −12 to −6 dBFS. Anything that hits about −1 dBFS or higher is clipping and will sound distorted.
Why is Browser noise suppression off by default?
To measure the real noise your mic and room produce. Browsers apply noise suppression, echo cancellation and automatic gain by default, which hides hum and changes levels. Turn it on to hear what a typical video call will sound like.
Why is my mic not working in the test?
Check the browser was allowed to use the microphone (click the icon in the address bar), pick the right input from the list, and make sure the mic is not muted by a hardware switch or by your system sound settings. Close other apps that may be holding the mic.