Dead Pixel Test
Run the fullscreen color sweep in a dim room and look closely at each slide. Turn on Mark defects to pin anything suspicious, then classify it.
Runs locally in your browser. No data leaves your device.
1/9 Pure black
Stuck subpixels show as bright red, green, blue or white dots.
Marked spots
Turn on Mark defects and click any suspicious dot. Pins stay in place on every slide. Click a pin again to remove it.
How to tell them apart
- Dead pixel:
- black on every slide, sharp edged.
- Stuck subpixel:
- a bright red, green or blue dot, most visible on black.
- Dust:
- visible on every slide, soft edged, and can shift when you wipe.
Stuck pixel flasher
A small flashing box you drag over a stuck subpixel for 10 to 20 minutes. It does not fix dead pixels.
Run the fullscreen color sweep
How to read the results
Run the sweep in fullscreen so browser bars and other windows do not hide part of the panel. Sit at your normal distance first, then lean in on anything suspicious.
What each slide is for
- Black: stuck subpixels and backlight bleed at the edges.
- White: dead pixels, dust and tint shifts.
- Red, green, blue: single dead subpixels that hide on white.
- 5% and 10% gray: OLED near-black banding, IPS glow and clouding.
- 50% gray: burn-in and overall uniformity.
- Gradient: banding from low bit depth or aggressive picture processing.
A new high refresh monitor? Check it is actually running at its rated speed with the refresh rate test.
Questions
How do I check my monitor for dead pixels?
Clean the screen, dim the room, and run the fullscreen sweep. Look closely at the pure black and pure white slides first. A dot that stays black on white and colors is a dead pixel; a bright colored dot on black is a stuck subpixel. Turn on Mark defects to pin each one so you can find it on every slide.
What is the difference between a dead pixel and a stuck pixel?
A dead pixel gets no power and stays black. A stuck pixel has one or more subpixels (red, green or blue) stuck on, so it shows as a bright colored dot. Stuck pixels can sometimes be freed by rapid flashing; dead pixels cannot be repaired.
Does the stuck pixel fixer actually work?
Sometimes. It cycles a small area through red, green, blue, white and black every frame, which can unstick a subpixel that is held on. Run it for 10 to 20 minutes. Results vary, and it does nothing for dead pixels. It flashes rapidly, so do not use it if you are sensitive to flashing light.
How do I check an OLED for burn-in or banding?
Use the 5% gray and 50% gray slides in a dark room. Banding appears as faint vertical or horizontal stripes on near-black gray. Burn-in shows as ghost shapes of things that sit on screen for long periods, like a taskbar, channel logo or game HUD, most visible on 50% gray.
Is one dead pixel covered by warranty?
It depends on the manufacturer's pixel policy. Some replace a monitor for a single bright pixel, others only above a set number of defects. Photograph the defect on the white or black slide and check the policy before the return window closes.