Skip to content
RigBench

Mouse Double Click Test

Click inside the pad with any mouse button, single clicks only. Presses that land faster than the threshold point to a bouncing switch. The second tab checks for scroll wheel jumps.

Runs locally in your browser. No data leaves your device.

–ms

Click here. Right, middle, back and forward buttons work too.

Bounce threshold80 ms
Total clicks
0
Fastest interval
–ms
Likely bounces
0
Borderline
0
Results per mouse button
ButtonClicksFastestBounces
Left0–0
Middle0–0
Right0–0
Back0–0
Forward0–0

Last 20 presses

Presses will be listed here with their interval.

Roll the wheel steadily in one direction for a few seconds, then the other way.

The page will not scroll while the pointer is here.

Up ticks
0
Down ticks
0
Reverse-scroll jumps
0
An opposite tick within 150 ms in the middle of a continuous scroll.
Ready

Click in the pad or scroll in the wheel tab

Single-click each button at a normal pace for 20 to 30 presses. A healthy switch never produces two presses closer together than about 80 ms, because a human finger cannot click that fast on purpose.

How to read the results

The pad records the time of every button press using the browser's high-resolution event clock and shows the gap since the previous press of the same button.

Thresholds

  • Under 80 ms: likely switch bounce when you clicked once.
  • 80 to 120 ms: borderline. A fast deliberate double-click can land here.
  • Over 120 ms: normal clicking.

Testing tips

  • Test one button at a time and only single-click. Intentional double-clicks will show as borderline.
  • Bounce is often intermittent. If the fault only shows in games, click for a full minute.
  • Try light, slow presses as well as firm ones. Worn switches often bounce on gentle presses.
  • For the scroll test use a physical notched wheel. Touchpads and free-spinning wheels send many tiny events and can trigger false readings.

Questions

How do I know if my mouse is double-clicking on its own?

Single-click one button at a normal pace inside the pad 20 to 30 times. If the test logs two presses less than about 80 ms apart when you only clicked once, the switch is bouncing. People cannot deliberately click that fast, so a sub-80 ms interval during single clicks is a hardware fault.

What causes a mouse to double-click?

Most mice use a mechanical switch with a thin metal leaf. Over time the contact surface oxidizes or the leaf loses spring tension, so one press makes and breaks the contact several times. The mouse firmware has a debounce timer to ignore that chatter, but once it outlasts the timer you get a double click.

Can I fix a double-clicking mouse without replacing it?

Often, for a while. Raise the debounce or click-latency setting in the mouse software if it has one, spray electrical contact cleaner into the switch, or replace the switch with a soldering iron. Optical-switch mice avoid the problem entirely because they detect a click with a light beam.

Why does my scroll wheel jump up when I scroll down?

The wheel uses a rotary encoder that reads position through small contacts. Dust or wear makes it read a false step in the opposite direction. Compressed air around the wheel fixes many cases; otherwise the encoder needs replacing.

Is the 80 ms threshold right for every mouse?

It is a practical default. Some people test at 60 ms to catch only clear faults, or at 100 ms for a stricter check. Use the slider to change it; the results update instantly.